Facebook

Lifting, Lashing & Rigging Knowledge Base

Lifting Rigging Industry Blog | Safety Tips Guides - H-Lift
click

Endless Type Ratchet Strap ETD35400: The Simple, Strong Way to Bundle Cargo

By H-Lift September 7th, 2026 169 views

Endless Type Ratchet Strap (ETD35400)

35mm Width | 6m Length | Fast and Secure Cargo Bundling
1,000 daN (Straight) 2,000 daN (Doubled) Endless Web Lashing

✅ Designed for Bundling, Not Anchoring

Some cargo doesn't need to be tied down to a deck, it just needs to be held together. Pipes, lumber, crates, and loose bundles of smaller units all share the same problem: without something wrapped around them, they shift, spread, and become unstable in transit. The Endless Type Ratchet Strap is built specifically for that job.

What Makes It "Endless"?

Unlike a standard two-part ratchet tie-down, which has a separate hook-ended strap and ratchet-ended strap joined together, an endless strap is a single continuous loop of webbing with one ratchet mechanism fixed to it.

To use it, the operator wraps the strap around the bundle of items being secured, then feeds the free end back into the ratchet's own mandrel and tightens it, exactly the way a luggage strap or moving-blanket strap works, just built to a much higher load rating. There are no hooks involved, which is precisely the point: this style of lashing isn't meant to anchor cargo to a truck bed or trailer rail, it's meant to cinch a bundle of loose items into one secure, transportable unit.

This simplicity is also what makes endless straps easy to store and quick to deploy. A warehouse or logistics team handling repetitive bundling tasks benefits from a strap that has no extra hardware to lose track of and takes seconds to wrap and tension.

Understanding LC, daN, and Doubled Capacity

The spec table lists two Lashing Capacity figures for the ETD35400—1,000 daN and 2,000 daN—and this often confuses first-time buyers. Lashing Capacity (LC) is the maximum force a lashing is rated to sustain in a straight-line pull, expressed in decanewtons (daN), where 1 daN is roughly equal to 1 kilogram-force.

The lower figure represents the strap's capacity when used in a single straight run. The higher figure represents its capacity when the strap is doubled back on itself, as it typically is in an endless configuration wrapped fully around a bundle, since the load is then being restrained by two strands of webbing working together rather than one.

It's also worth understanding how LC relates to the Minimum Breaking Strength (M.B.S.). M.B.S. is the destructive test value—the force at which the webbing actually fails. By design, it sits well above the strap's rated Lashing Capacity to build in a safety margin. On the ETD35400, an M.B.S. of 4,000 kg against a doubled LC of 2,000 daN reflects standard 2:1 safety margin practice; a strap should never be used anywhere near its breaking strength.

Single-Part vs. Two-Part Lashing

Picking the wrong lashing style is a common and avoidable mistake:

  • Single part web lashing (endless type): One continuous strap with an integrated ratchet, no hooks. Designed to wrap around and bundle loads together. Simple to handle and store, but limited to bundling rather than tie-down anchoring.
  • Two-part lashing system: A longer hook-ended strap paired with a shorter ratchet-ended strap. Better suited to heavier or irregularly shaped loads that need to be actively restrained against sliding or tipping during transport by anchoring directly to fixed points on a vehicle bed.

For a straightforward job—bundling a stack of PVC pipe or banding a pallet of boxed goods—the endless ETD35400 is the more practical choice.

⚠️ Practical Notes for Use

  • Confirm the bundle's combined weight and shape sit comfortably within the strap's doubled LC rating of 2,000 daN.
  • Protect the webbing from sharp edges or corners on the load; unprotected edge contact is a primary cause of premature failure.
  • Inspect the strap before each use for cuts, fraying, chemical staining, or a ratchet mechanism that doesn't engage smoothly. Retire damaged straps immediately.
  • Store the strap coiled and dry between uses to avoid UV degradation and moisture-related wear.

ETD35400 Specifications

The ETD35400 sits in the middle of H-Lift's endless strap range, offering a versatile size ladder to match strap capacity to bundle weight and shape rather than over- or under-specifying for the job.

Specification Detail / Rating
Product Code 401103501
Width 35 mm
Length 6 m
Lashing Capacity (LC) - Straight Pull 1,000 daN
Lashing Capacity (LC) - Doubled/Choked 2,000 daN
Minimum Breaking Strength (M.B.S.) 4,000 kg
End Fitting None (Endless Loop)
Tensioning Device Integrated Ratchet Handle
Hand Chain Hoist, Manual Lifting Power Where Electricity Isn't an Option
Previous
Hand Chain Hoist, Manual Lifting Power Where Electricity Isn't an Option
Read More
Ratchet Tie-Down Strap RTD5040DJ: 50mm Double-J Hook Lashing to EN 12195-2
Next
Ratchet Tie-Down Strap RTD5040DJ: 50mm Double-J Hook Lashing to EN 12195-2
Read More
We use cookies to improve your online experience. By continuing to browse this website, you agree to our use of cookies.