Lifting Solution Specialist

Turnbuckle, Rigging Screw

Home  Products  >  Rigging Hardware  >  Turnbuckle/Rigging Screw

Drop Forged Turnbuckle
Rigging Screw, Turnbuckle
Lashing Turnbuckle with Pear Link and Pelican Hook Size: 1-1/4 x 18-inch

US Type Drop Forged Turnbuckle

DIN 1480 Turnbuckle

Commercial type Turnbuckle

JIS Frame Turnbuckle

DIN 1478 Turnbuckle

Rigging Screw

Hamburg Turnbuckle

Rigging screws are used to provide a means for length adjustment and for tensioning. They are also used with guys for masts, towers, other structures and engineering applications. Rigging screws generally have elongated eyes or clevis end fittings for connection to shackles, wire rope assemblies, pad eyes and the like. A central cross-hole is provided at the inner end of the thread and at each end of the body, which permits visual observation of the maximum permitted extended position of the end fitting. Rigging screw bodies are formed from tubular sections of steel and can have an almost infinite size range and scope for length adjustment. Size and adjustment of rigging screws is limited by the available end fittings. Additionally, rigging screws have the innate facility for continuing lubrication as the enclosed section of the body provides a suitable reservoir for grease or other lubrication. Hence, they have an advantage in relative corrosive applications such as ships rigging and permanent outdoor guys.

Turnbuckles have the same applications as rigging screws, but have a generally smaller size range and shorter adjustment. The main benefit of a turnbuckle is that it may have a greater ability to be tightened under load. Also, there may be a wider scope for providing means for locking while in service.