Facebook
  • Grade 100 DNV Master Link Assembly DMA type
  • Grade 100 DNV Master Link Assembly DMA type

Grade 100 DNV Master Link Assembly DMA type

No.505037

This Grade 100 DNV Master Link Assembly (DMA Type) is a heavy-duty multi-leg top assembly engineered specifically for offshore containers, marine lifting sets, and harsh subsea operations requiring superior strength and low-temperature impact resistance.

  • High-Strength Grade 100 Alloy Steel: Quenched and tempered alloy steel delivers high strength-to-weight ratios and exceptional durability under extreme offshore dynamic loads.
  • Multi-Leg Sub-Link Configuration: Consists of a main master link and two intermediate sub-links, engineered to assemble balanced 3-leg and 4-leg chain or wire rope sling bridles.
  • Offshore Lifting Compliance: Designed and tested in accordance with strict offshore standards (such as DNV 2.7-1 / ISO 10855 / EN 12079) for certified container handling.
  • Sub-Zero Impact Toughness: Verified Charpy V-notch energy properties ensure reliable fatigue strength and fracture resistance in freezing offshore climates (down to -40°C).
  • Proof Tested & Traceable: 100% proof load tested and fully certified with batch traceability and a heavy-duty protective coating for marine corrosion resistance.

Technical Data

Grade 100 DNV Master Link Assembly (DMA Type)

Articulated Quad Architecture for Sub-Zero Offshore & Marine Lifts
DNV 2.7-1 Approved Grade 100 Alloy Steel -40°C Low Temp Rated EN 12079 / EN 1677-4 5:1 Safety Factor
The H-Lift Grade 100 DNV Master Link Assembly (DMA Type) is a certified structural solution designed for safe and reliable use in heavy-duty lifting operations, including offshore, subsea, and extreme marine environments. Built to the highest standards of strength and durability, this master link assembly is perfectly suited for 3-leg and 4-leg chain sling systems, wire rope slings, and heavy synthetic lifting sets where compliance and reliability are critical.

Critical Offshore Engineering Features

🌊 DNV 2.7-1 Type Approved

Fully compliant and certified for offshore containers and lifting sets, ensuring strict adherence to the safety standards of the global maritime and oil & gas industries.

❄️ Sub-Zero Impact Toughness

Manufactured from vacuum-degassed nickel-chromium-molybdenum alloy steel. Every production heat is Charpy V-notch tested to absorb ≥ 42 Joules at -40°C, eliminating catastrophic brittle fracture risks in the Arctic.

🛡️ Optimized for DAF

Meets or exceeds the rigorous fatigue endurance (20,000 dynamic cycles at 1.5× WLL) and yield strength criteria mandated by DNV 2.7-1 and EN 12079-2 for dynamic offshore lifts.

🔍 100% Traceable & Certified

Each forged component is permanently stamped with a batch code and supplied with full EN 10204 3.1 certification to guarantee material integrity and test compliance.

🎨 Anti-Corrosion / Embrittlement

Finished with a protective powder-coating to withstand harsh marine environments, and treated with specialized heat processes to completely prevent hydrogen embrittlement.

Three-Piece Articulated Quad Architecture

The DMA Type integrates a large primary master ring with two independent engineered intermediate sub-links. This design is structurally crucial for multi-leg offshore lifts:

Zero Out-of-Plane Bending

Sub-links pivot freely around the primary ring's lower saddle, ensuring the tensile pull remains aligned with the axis of each sling leg. This completely eliminates destructive lateral bending moments on the main link.

Dedicated Two-Leg Isolation

Because each sub-link supports exactly two legs, mechanical chain connectors (such as G100 couplers or heavy offshore shackles) seat side-by-side without overlapping, pinching, or jamming under tension.

Crane Hook Bowl Seating

The extra-large top master ring remains entirely open, enabling positive, unencumbered seating into large offshore crane hooks and ramshorn hooks (DIN 15401 / DIN 15402) without fouling safety latches.

Wire Rope Compatibility

Particularly suited to heavy wire rope slings, as the expansive inner width of the sub-links provides ample space to accommodate bulky wire rope thimbles side-by-side.

Technical Specifications & Dimensions

Available in a capacity range from 7.8 tons up to 56 tons with an ultra-safe 5:1 Safety Factor.

Grade 100 DNV Master Link Assembly DMA Type
Item No. WLL (ton) Main Dimensions (mm) Weight (kg) Product Code
A B D a b d S × H
10-DMA-27 7.8 190 110 27 150 80 20 11 × 35 4.9 505037010
10-DMA-28 10.6 270 140 28 160 95 22 12 × 35 6.7 505037013
10-DMA-32 14.1 270 140 32 190 110 28 15 × 46 10.8 505037016
10-DMA-40 21.6 270 140 40 200 120 32 17 × 55 16.2 505037019
10-DMA-45 27.6 300 180 45 250 150 38 20 × 65 25.8 505037022
10-DMA-50 40.0 300 190 50 250 150 40 22 × 70 30.7 505037040
10-DMA-60 56.0 400 200 60 250 150 45 23 × 73 47.4 505037026

📋 DNV 2.7-1 & EN 12079 Compliance

For lifting offshore containers with 4-leg slings, DNV regulations strictly require the use of a master link assembly with intermediate sub-links (DMA Type). Attaching four legs to a single ring is non-compliant as it induces severe transverse bending moments. Always ensure your lifting set's top hardware matches the mandated geometric architecture.

Technical Offshore Rigging Q&A

Why is an articulated DMA master link assembly required for 4-leg offshore container slings instead of a single ring?
Attaching four offshore sling legs directly to a single top ring forces the couplers against one another, causing severe out-of-plane transverse bending moments. Under DNV 2.7-1 and EN 12079, a quad assembly (DMA Type) with two independent sub-links isolates pairs of legs. This allows each sub-link to articulate freely along the dynamic load line, preventing side-loading and ensuring that tensile stress is purely axial.
What is the Charpy V-notch impact requirement for DNV 2.7-1 master link assemblies?
DNV 2.7-1 mandates that lifting set components must absorb a minimum of 42 Joules of impact energy at -40°C (or -20°C for less severe operational zones). This ensures the quenched and tempered alloy steel maintains high fracture toughness without undergoing brittle transition under sub-zero marine conditions.

Engineered for the Extreme

The Grade 100 DNV Master Link Assembly (DMA Type) provides the ultimate structural foundation for multi-leg offshore sling configurations. By isolating leg forces through articulated sub-links and exceeding standard impact toughness requirements, the DMA Type guarantees that your offshore container lifts remain completely safe and compliant.

Download

We use cookies to improve your online experience. By continuing to browse this website, you agree to our use of cookies.