The 10-SHR Swivel Lifting Point is a heavy-duty bolt-on attachment point engineered for lifting machinery, moulds, dies, heavy fabrications, and other loads equipped with tapped holes. Unlike traditional fixed DIN 580 eye bolts that pose a severe risk of unscrewing or bending under side loads, this dynamic ring rotates a full 360° to perfectly align itself with the pulling direction of the sling, chain, or hook.
Key Engineering Features
🔄 360° Unrestricted Rotation
The ring turns freely to follow the exact load path of the sling. This prevents lateral bending forces on the bolt and stops the load from twisting unpredictably during the lift.
⚖️ Two Rated Load Directions
Capacity is precisely stated for both a worst-case 90° side pull and an optimal 0° axial pull, allowing riggers to select the exact safe working load based on their specific rigging geometry.
📏 Wide Thread Range (M8–M36)
Available in eight standardized metric thread sizes covering working load limits from 0.5 tons (for light fixtures) up to a massive 12.5 tons (for heavy industrial machine components).
🏷️ Clear WLL & Thread Marking
The Working Load Limit and specific thread size are permanently forged/stamped onto the ring itself, ensuring riggers can quickly verify safety metrics before every operation.
🔵 High-Visibility Finish
Treated with a highly visible blue powder-coated finish. This protects against corrosion while making the lifting point easy to spot and inspect on busy, poorly lit shop floors.
♻️ Reusable & Removable
Engineered for versatility. Remove it safely after the lift to use on the next payload, or leave it permanently installed on the structure (provided tightening torque specifications are maintained).
Technical Specifications & Dimensions

| Item No. |
WLL (ton) |
Thread M × H (mm) |
Dimensions (mm) |
Weight (kg) |
Product Code |
| 90° Pull |
0° Pull |
A |
B |
C |
D |
E |
Φ |
W |
L |
| 10-SHR-08 |
0.5 |
0.7 |
M8 × 12 |
27 |
33 |
7 |
10 |
15 |
35 |
58 |
96 |
0.39 |
505038008 |
| 10-SHR-10 |
0.7 |
1.0 |
M10 × 16 |
27 |
33 |
7 |
10 |
15 |
35 |
58 |
96 |
0.40 |
505038010 |
| 10-SHR-12 |
1.0 |
1.35 |
M12 × 19 |
27 |
33 |
7 |
10 |
15 |
35 |
58 |
96 |
0.41 |
505038012 |
| 10-SHR-16 |
2.0 |
2.5 |
M16 × 20 |
48 |
58.5 |
10 |
14 |
18 |
49 |
84 |
155 |
1.23 |
505038016 |
| 10-SHR-20 |
3.0 |
4.0 |
M20 × 30 |
52 |
63 |
12 |
17 |
25 |
59 |
102 |
179 |
2.30 |
505038020 |
| 10-SHR-24 |
5.0 |
6.3 |
M24 × 36 |
58 |
85 |
18 |
22 |
26 |
68 |
120 |
214 |
3.57 |
505038024 |
| 10-SHR-30 |
6.3 |
8.0 |
M30 × 45 |
60 |
85 |
20 |
27 |
29 |
74 |
128 |
230 |
5.05 |
505038030 |
| 10-SHR-36 |
10.0 |
12.5 |
M36 × 55 |
80 |
120 |
26 |
32 |
38 |
89 |
166 |
301 |
9.95 |
505038036 |
Installation & Safe Rigging Practices
Primary Applications
- Machine tools, presses, and heavy industrial equipment.
- Lifting heavy moulds, metal stamping dies, and tooling.
- Steel fabrications and large welded structures.
- Precast concrete components and pressure vessels.
Installation Protocol
- Check Thread & Hole: Ensure the threaded hole is clean and deep enough to accept the full thread length (H). The mounting surface must be flat and structurally sound.
- Torque & Tighten: Seat the bolt fully flush against the load surface. Ensure the ring still rotates 360° completely unobstructed after tightening.
- Determine Load Angle: Always calculate sling tension based on multi-leg angles and apply the correct WLL (0° vs 90°).
⚠️ Mandatory Rigging Warning & Safety Limits
- NEVER exceed the Working Load Limit (WLL) assigned for your specific pull angle.
- DO NOT LIFT if the ring binds, sticks, or fails to rotate freely after the bolt is tightened.
- Use only the original factory-supplied high-tensile bolt. Never replace the engineered load bolt with a standard commercial screw or bolt.
- Never use lifting points to suspend or lift personnel.
- Inspect before every lift: Retire the lifting point immediately if you find cracks, deformation, worn threads, or unreadable WLL markings.
Technical Rigging Q&A
Why choose a swivel lifting point over a standard DIN 580 fixed eye bolt?
Fixed eye bolts like the DIN 580 are primarily designed for straight, axial pulls (0°). If the load shifts or a multi-leg sling induces an angular side pull, a fixed eye bolt can undergo severe lateral bending stress, or worse, dynamically unscrew from its threaded hole. A swivel lifting point rotates 360° to perfectly align with the exact load path, eliminating twist, preventing thread backing, and safely absorbing lateral shear forces.
How do the dual WLL ratings (0° vs 90°) work in practice?
The swivel ring has two distinct load capacities based on the angle of the lift. A straight axial pull (0°, lifting straight up in line with the bolt) puts less bending stress on the bolt mechanism, allowing for a much higher WLL. A side pull (90°) leverages the bolt laterally, requiring a more conservative WLL. Always rig according to the 90° WLL capacity if there is any possibility of side-loading or if you are using a multi-leg bridle sling.
Safe, Reusable, and Versatile
The 10-SHR Swivel Lifting Point provides total flexibility for your rigging operations. Its wide internal ring opening accommodates standard chains, webbing slings, heavy shackles, and crane hooks. Whether permanently mounted for the life of the equipment or removed and reused daily on the shop floor, it is the safest solution for multi-directional lifting.