Facebook
  • Grade 6 DNV Bow Shackle
  • Grade 6 DNV Bow Shackle

Grade 6 DNV Bow Shackle

No.701013

This Grade 6 DNV Bow Shackle is specifically engineered for critical offshore lifting, marine rigging, and container handling, delivering certified strength, fatigue endurance, and impact resistance in extreme maritime environments.

  • High-Grade Quenched & Tempered Steel: Forged Grade 6 high-tensile alloy steel construction ensures reliable ductility, shock resistance, and long-term durability under dynamic offshore loads.
  • Strict Offshore Compliance: Manufactured, tested, and certified to meet offshore standards (including DNV 2.7-1, EN 12079, and ISO 10855) for certified offshore container slings and marine operations.
  • Sub-Zero Impact Toughness: Charpy V-notch impact tested to guarantee safe, brittle-fracture-resistant performance in freezing marine conditions down to -40°C.
  • Safety Bolt, Nut & Cotter Pin: Four-part safety closure locks the pin securely in place, completely eliminating the risk of accidental unscrewing caused by vibration or line twist.
  • Hot-Dip Galvanized Protection: Premium heavy-duty hot-dip galvanized coating ensures maximum defense against saltwater corrosion, atmospheric rust, and offshore weathering.

Technical Data

Grade 6 DNV Bow Shackle (Safety Bolt Type)

6:1 Design Factor Anchor Shackles for DNV 2.7-1 Offshore Container Rigging
DNV 2.7-1 Approved EN 13889 Grade 6 6:1 Safety Factor -40°C Low Temp Rated Safety Bolt & Cotter Pin
In offshore exploration, mobile offshore drilling units (MODUs), subsea support vessels, and offshore wind farm operations, rigging gear must absorb extreme wave heave, dynamic vessel snatch loading, and severe angular oscillations. Under international offshore regulations—specifically DNV 2.7-1, EN 12079-2, and ISO 10855-2—shackles deployed in lifting slings for offshore containers must comply with strict dimensional, mechanical, and metallurgical safety margins. While Grade 80 hardware uses high-strength micro-alloys with a 4:1 design factor for general rigging, Grade 6 (EN 13889) represents the global marine benchmark for container slings, combining high material ductility with a mandatory 6:1 Design Safety Factor.

Critical Offshore Engineering Features

🔒 Safety Bolt, Nut & Cotter Pin

Features an alloy bolt secured with a heavy hex nut and a marine-grade 316 stainless steel cotter pin (split pin). This positive triple-locking mechanism prevents dynamic vibrations from backing the pin out during sea voyages.

🛡️ Mandatory 6:1 Design Factor

Engineered to EN 13889 and US Federal Specification RR-C-271 Type IVA Class 3, ensuring a substantial safety buffer to absorb dynamic shock spikes and heave accelerations common in open-sea transfers.

❄️ Sub-Zero Impact Toughness

Forged from high-tensile carbon-manganese alloy steel, quenched and tempered. Every heat is Charpy impact tested to absorb ≥ 42 Joules at -40°C, preventing brittle cleavage failure in the Arctic.

🌊 Hot-Dip Galvanized Protection

Both the forged bow and high-tensile pin undergo heavy hot-dip galvanization to ISO 1461, followed by an industrial colored powder coat on the pin head to provide long-term protection against marine salt spray.

🔍 100% Proof Tested & MPI

Every production batch is statically proof-tested to 2.0× WLL and subjected to wet fluorescent Magnetic Particle Inspection (MPI) to guarantee zero subsurface flaws.

📋 DNV Type Approval & Witness

Approved for offshore container and portable offshore unit lifting sets (DNV-ST-E271). The approval includes design review, prototype testing, and periodic factory assessment every 6 months.

Technical Specifications & Dimensions

Item No. Size WLL
(ton)
Dimensions (mm) Weight
(kg)
Product Code
A B D E L Φ K Φ'
SH13016 5/8" 3.25 27 43 16 17.6 106.5 19 59.7 38 0.75 701013016
SH13019 3/4" 4.75 32 50.8 19 20.6 126.2 22 71 46 1.25 701013019
SH13022 7/8" 6.5 36.6 58 22.4 24.6 148 25 83.4 53 1.91 701013022
SH13025 1" 8.5 43 68.3 25.4 27.1 166.7 28 94.3 60.5 2.77 701013025
SH13029 1-1/8" 9.5 46 74 29.5 31.8 190 32 107 68.3 4.07 701013029
SH13032 1-1/4" 12 51.6 82.5 32.7 35 210 35 118.2 76.2 5.81 701013032
SH13035 1-3/8" 13.5 57 92 36 35 232.7 38 135.5 84 7.2 701013035
SH13038 1-1/2" 17 60.5 98 39 41 254 42 144.7 92.2 9.3 701013038
SH13044 1-3/4" 25 73.2 126 46.7 57.2 313.7 51 176.6 106.4 18.3 701013044
SH13050 2" 35 82.5 146 52.8 61 347.5 57 195.5 122 25.3 701013050
SH13063 2-1/2" 55 105 184 68.8 79.5 453 70 264.5 144.7 50.4 701013063

Offshore Shackle De-Rating (Side Loading)

Under ASME B30.26 and DNV guidelines, when multi-leg bridles pull on the bow out-of-plane, the Working Load Limit must be structurally de-rated:

Angle of Load from Vertical (θ) Allowable Effective Capacity Operational Impact
0° (In-Line Axial) 100% of Rated WLL Optimal design alignment; full capacity maintained.
45° (Off-Center) 70% of Rated WLL 30% reduction required to prevent pin bending.
90° (Transverse Side Pull) 50% of Rated WLL 50% reduction mandatory; high shear on pin and ear threads.
> 90° (Back-Loading) STRICTLY PROHIBITED Catastrophic failure risk; pin can unseat or shear ears.

⚠️ Statutory Inspection & Discard Metrics

Under DNV 2.7-1, EN 13889, ASME B30.26, and ISO 10855-2, all offshore bow shackles must be inspected prior to each mobilization and retired immediately if any of these conditions occur:

  • Wear: Any wear, friction groove, or thickness loss exceeding 10% of nominal diameter.
  • Jaw Spread: Inside jaw width has widened by more than 5% from factory specs (indicates overload).
  • Pin Bending: Any visible bend or camber in the alloy bolt (> 0° out-of-straight). Do not attempt to straighten.
  • Missing Hardware: Shackle is missing the cotter pin or is fitted with an uncertified non-locking nut.
  • Cracks & Gouges: Any hairline crack (visible or MPI-detected) or notches deeper than 5% of thickness.
  • Missing Marks: Traceable heat code, WLL, manufacturer mark, or DNV approval code is illegible.

Applications & Rigging Requirements

Primary Applications
  • Lifting sets for offshore containers and portable offshore units.
  • Offshore platforms, vessels, and subsea support.
  • Ports, shipyards, and heavy construction lifting.
  • Multi-leg slings and engineered rigging assemblies.
Rigging Safety Notes
  • An offshore container lifting set must never have a WLL below 7.0 t.
  • Fit the bolt, nut, and cotter pin fully before every lift.
  • The company that assembles the lifting set is considered the lifting set manufacturer under DNV approval.

Certified Supply & Ductility

Grade 6 carbon/low-alloy steel exhibits high fracture elongation (≥ 16% - 18%), providing crucial visual elongation warning under gross dynamic overload prior to failure. A DNV-compliant product certificate (DNV-ST-E271 section 8.5) is issued for each shackle, ensuring complete traceability and statutory compliance for your offshore operations.

Download

We use cookies to improve your online experience. By continuing to browse this website, you agree to our use of cookies.