Endless One Way Sling

Item No.: 3050, 3051
One way use slings are used for the loading and unloading of cargo until they are off loaded at there final destination.
Safety Factor 5:1 to DIN 60005,  4:1, 6:1 and 7:1 available upon request
Special capacity, length, colour can be made to your needs.
Description One Trip Textile Sling

The term one way use sling or one trip textile sling is given to a woven textile sling that has been designed for the specific purpose of attaching to, and accompanying, a specific product for its specified journey, from source to final destination. To avoid further use of the sling they shall be taken out of service and disposed of responsibly, to prevent further use. They must not be used as a general-purpose sling or outside of the limitations of use specified by the manufacturer. In this respect, they differ from lifting slings that comply with EN 1492-1 and that may be reused for transport and lifting operations.

The one way use sling or single use sling is simply wrapped and secured around the load and connected to a lifting device. And they will stay with the load throughout its operation until the sling is completely removed at the final destination.


  • Designed for single use applications, ideal for one-way transport operations, from the manufacturer to the final consumer.
  • Low cost with simple design, which saves time & effort.
  • Made from high-tenacity polyester yarn (PES).
  • Stronger and more compact than rope or wire rope alternative solutions.
  • Easy to use and can be pre-inserted in bundles of pipe.
  • Endless type one way sling or one way sling with eyes.
  • Color: white, yellow & other colors upon request.
  • Safety Factor 5:1 to DIN 60005 standard.
  • Safety Factor 4:1, 6:1 or 7:1 available upon request.
  • Classic areas of application:
  • Prefab-house industry and suppliers
  • Timber construction
  • Transport of overlong goods, e.g. tubes
  • Steel distribution
Single-ply endless flat sling, effective working lengthone way sling one way use sling, one trip textile sling, din 60005, one way disposable sling, one trip sling, single way sling

Endless Type One Way Sling

 H-Lift One Way Use Sling Item No. WLL(kg) Width(mm) Effective Length Product Code
WS09-0500 500 25/30 0.5m ~ 10m 305025050
WS09-0750 750 25/30 0.5m ~ 10m 305025075
WS09-1000 1000 30/35 0.5m ~ 10m 305030100
WS09-1200 1200 50 0.5m ~ 10m 305050120
WS09-1500 1500 50 0.5m ~ 10m 305050150
WS09-1700 1700 50 0.5m ~ 10m 305050170
WS09-2000 2000 50/60 0.5m ~ 10m 305050200
WS09-2250 2250 50/60 0.5m ~ 10m 305050225
WS09-2500 2500 75 0.5m ~ 10m 305075250
WS09-3000 3000 75/90 0.5m ~ 10m 305075300
One Trip Textile Sling
One Way Use Sling DIN 60005

A one-way trip sling is a type of disposable sling that is intended for single-use only. These slings are typically made of lightweight materials and are designed to be used for a single lifting operation before being discarded. One-way trip slings are often used in applications where it is not practical or feasible to retrieve the sling after use, or where hygiene and contamination control are critical factors.

When using a one-way trip sling, it is important to carefully inspect the sling for any signs of damage or wear before use. The sling should only be used for lifting loads that are within its safe working load (SWL) capacity, which should be clearly marked on the sling. Additionally, the sling should be properly attached to the load and lifting equipment, and lifted smoothly and steadily to avoid any sudden or jerky movements that could cause the load to shift or fall.

After use, the one-way trip sling should be immediately disposed of according to local regulations for handling and disposing of hazardous waste or single-use products. It is important to not attempt to reuse or repurpose a one-way trip sling, as doing so could compromise the integrity of the sling and lead to potential safety hazards.

Send your message to us